Difference between revisions of "Bridge"

From ENGR005 2008
Jump to: navigation, search
Line 7: Line 7:
  
 
*[[User:kpytlar1 | Kevin Pytlar ]]
 
*[[User:kpytlar1 | Kevin Pytlar ]]
 +
 +
==Project Origins==
 +
The idea for a drawbridge came from dinner with a non engineering major.  While initially skeptical, we soon agreed that the idea was doable and, more importantly, interesting. 
  
 
==Project Description==
 
==Project Description==
Line 16: Line 19:
 
*plywood
 
*plywood
 
*screws
 
*screws
*2 door hinges
+
*duct tape
 
*metal rods
 
*metal rods
 
*photoelectric sensor
 
*photoelectric sensor
Line 24: Line 27:
  
 
===Design===
 
===Design===
 +
Our first design decision was how to raise the bridge, i.e. where exactly we would place the servos and in what configuration.  Initially we planned to raise the bridge by attaching the servos to the bridge halves.  Upon further consideration we decided upon a more indirect approach and implemented a drawbridge design where the servos would wind up strings attached to the end of the bridges.  We figured that this design was more interesting and it would be easier for the servos to support the weight.
 +
 +
Additionally, we added an additioanl component by "robotizing" the bridge. We automated the bridge by triggering it with a light sensor.  When an object blocked light from the sensor, the computer would recognize the dip in dispelled electrons and send a signal to the servos to turn and raise the bridge.
 +
 +
We began designing for construction by specifying rough dimensions of the bridge and of the individual parts.  We decided that a 2.5 ft by 1 ft bridge was a substantial but convenient size to work with.
 +
 +
===Construction===
 +
 +
 +
 +
===Programming===
  
====Construction====
 
  
=====Programming=====
 
  
 +
==Final Result==
  
  
 
Back to [[Final Project]]
 
Back to [[Final Project]]

Revision as of 16:00, 8 December 2008

Members

Project Origins

The idea for a drawbridge came from dinner with a non engineering major. While initially skeptical, we soon agreed that the idea was doable and, more importantly, interesting.

Project Description

We will be constructing and programming a plywood drawbridge using Matlab. It will be capable of detecting motion through use of a photoelectric sensor and lifting the two halves of the bridge as a response. It will use servos to wind up strings attached to the ends of the halves to lift them.

Materials

  • 4 servos
  • plywood
  • screws
  • duct tape
  • metal rods
  • photoelectric sensor
  • string

Process

Design

Our first design decision was how to raise the bridge, i.e. where exactly we would place the servos and in what configuration. Initially we planned to raise the bridge by attaching the servos to the bridge halves. Upon further consideration we decided upon a more indirect approach and implemented a drawbridge design where the servos would wind up strings attached to the end of the bridges. We figured that this design was more interesting and it would be easier for the servos to support the weight.

Additionally, we added an additioanl component by "robotizing" the bridge. We automated the bridge by triggering it with a light sensor. When an object blocked light from the sensor, the computer would recognize the dip in dispelled electrons and send a signal to the servos to turn and raise the bridge.

We began designing for construction by specifying rough dimensions of the bridge and of the individual parts. We decided that a 2.5 ft by 1 ft bridge was a substantial but convenient size to work with.

Construction

Programming

Final Result

Back to Final Project