Difference between revisions of "Project 2, Team A3"

From ENGR005 2008
Jump to: navigation, search
Line 18: Line 18:
 
[[Image:A3alpha.jpg]]  
 
[[Image:A3alpha.jpg]]  
  
 +
===Omega Squad===
 +
 +
Omega Squad (Kevin and Will) made a design that was inspired by the Mickey Mouse sample bridge. However, instead of using one ring, they used three, and connected the rings with a series of crossbeams. This was meant to spread the stress from the top beam to the sides, since the rings would try to spread sideways when compressed. When tested, the design showed a great deal of displacement in the middle. To fix this, they filled in the center of the middle ring, which was meant to decrease the flexibility of the center portion of the bridge. The resulting design is shown below, and has a score of 2.872116E-6
 +
[[Image:A3omega.jpg]]
  
 
[[Bridge_Section | ← Back to Bridge Section project page ←]]
 
[[Bridge_Section | ← Back to Bridge Section project page ←]]

Revision as of 01:32, 25 September 2008

← Back to Bridge Section project page ←

Synopsis of Bridge Scores

  • α squad score: 1.498662E-6
  • Ω squad score: 2.872116E-6
  • Current best team score: 1.42911E-6

Team Members

Report

Alpha Squad

Alpha Squad (Jack and John) based their design on the principle that arches are the strongest structure in nature. They started by making a semicircular hole in the center of the design, which created a main arch. Then, to minimize the surface area used, they cut curved, triangular holes into the outside section of the bridge. This made a series of branching archways that spread the stress towards the outside as opposed to downwards. Then, they tested their design with COSMOSXpress and found that most of the displacement was occurring at the center of the top crossbeam and most of the stress was concentrated in the inside corners. To minimize the displacement in the center, they thickened the center of the top crossbeam by reducing the radius of the circle used to create the main arch. To keep the stress from building in the inside corners, they used the filet tool to round off the corners. The resulting design is shown below, and has a score of 1.498662E-6 A3alpha.jpg

Omega Squad

Omega Squad (Kevin and Will) made a design that was inspired by the Mickey Mouse sample bridge. However, instead of using one ring, they used three, and connected the rings with a series of crossbeams. This was meant to spread the stress from the top beam to the sides, since the rings would try to spread sideways when compressed. When tested, the design showed a great deal of displacement in the middle. To fix this, they filled in the center of the middle ring, which was meant to decrease the flexibility of the center portion of the bridge. The resulting design is shown below, and has a score of 2.872116E-6 A3omega.jpg

← Back to Bridge Section project page ←