Difference between revisions of "Team Wharton A"

From ENGR005 2008
Jump to: navigation, search
Line 33: Line 33:
  
 
==Team members==
 
==Team members==
Daniel Cabrera
+
[[User:dcabre1 |Daniel Cabrera]]
  
 
[[User:oerturk1|Ozan Erturk]]
 
[[User:oerturk1|Ozan Erturk]]

Revision as of 15:39, 13 September 2008

Brainstorming

We sat in a circle discussing our materials and what we could do with them to be both creative and effective. We debated different possibilities, and everyone suggested any ideas that came to mind. Travis recorded the ideas as they came up. As we discussed, we eventually came to a general consensus about our plan.

Ideas

Here are the possibilities that we discussed:


Create a flat surface with greatest possible surface area

Make it spin

Cut dowel rods and tennis ball (into pieces)

Cut ball and stick paper clip in to use as a fish hook

Cut rods and tape them together to make more than three

Wings 0 cut bag on seams at an angle

Place ball in bag

Remove drawstring and use it for something else, stretch bag

Impale ball and stick rods in

Choosing final design

First of all, we wanted to create the largest surface area to increase the air resistance on the trash bag to make the fall slow. Thus, we decided to gather the tips of the sticks and generate a three equal parts of a circle by putting them 120o apart. (We also used plastic tape’s cover to keep the sticks together.)We wanted to forestall it to behave like a parachute because we thought that if it rotates it could hang in the air for longer time. We considered cutting triangular wings by cutting the trash bag from corners-on its diagonal. To make it rotate, we decided to attach one side of the wing on the stick completely and prevent the air flow on that side. However, we only attached the tip of the wing to the tip of the stick and left space for air flow. According to the plan, if we build wings in this way air resistance will cause it to spin due to allowing only one direction flow of air. In addition, we decided to cut the tennis ball into three equal parts to hang each part on three sticks so we can distribute the weight and prevent it to flip.


Final drop time

Our final drop time was 3.91 seconds.

Team members

Daniel Cabrera

Ozan Erturk

Jonathan Martin

Travis Pollen

David Saltzman


Back to Ball Drop page.