Omni Directional Wheels
This is the page for Tad Goff's E5 final project, Omni-Directional Wheels
Build a device that moves omni-directionally using holonomic or 'omni' wheels. There will be four wheels arranged around the chassis such that there are two opposing sets. The device will be controlled by an analog thumbstick salvaged from a Playstation 2 controller, and will be programmed in MatLab.
Description of Project
The final product is a “robot” that moves omni-directionally.I used holonomic wheels and continuous rotation servo motors for locomotion, and a Playstation 2 thumbstick for control.
Segway's new RMP
These mecanum wheels use rollers on a 45° angle around the circumference to allow lateral motion. I saw this online and I though that it looked cool, and possible for a project (If I could get the wheels.) As it turned out I could not get the mecanum wheels but it did start me thinking about methods for omni-directional motion.
When all the wheels spin forwards, the lateral forces created by the angle of the rollers cancel and the device moves forward normally. When the wheels spin in different directions, the forwards and backwards forces cancel and the device moves laterally, diagonally or spins.
My design consists of two sets of wheels perpendicular to each other driven by servo motors. For control I took a Playstation 2 controller apart and used the thumbstick in stead of the two potentiometers in the "pot boxes" we used to control the arm. The script is very simple. It scales the potentiometer values from the thumbstick to add to the pulse widths for the motors
Holonomic wheels (also known as omni wheels)have rollers perpendicular to the direction of rotation. This allows them to roll normally and slide laterally. By positioning them so they are not parallel they can move omni-directionally. My design uses two sets of wheels perpendicular to each other, but any no-parallel arrangement will work.