Difference between revisions of "Robotic Arm: Team November"

From ENGR005 2008
Jump to: navigation, search
(Members)
Line 4: Line 4:
 
Daniel Cabrera,
 
Daniel Cabrera,
 
Tony Blekicki
 
Tony Blekicki
 +
 +
==MatLab Code for Physical Model==
 +
 +
%[thetaA, thetaB] = inverseKinematicsfunction(4.5, 3.75,6.5,-1.5);
 +
 +
% This script takes input from the user and uses it to test the function
 +
% gotoAngles
 +
 +
s=instrfind;  %Find any serial links (we can have only 1)
 +
delete(s);    %... and delete.
 +
%Create a new serial communications link
 +
s=serial('COM1','Baudrate',115200,'Terminator','CR');
 +
fopen(s);      %... and open it
 +
 +
% set pulsewidth on channels 1 & 2to 1500 microseconds (over 200 mS)
 +
fprintf(s,'#1P1500#2P1500T200');
 +
 +
%Draw and animate the arm;
 +
numPts = 20;                    %the number of points in the animation
 +
phi = linspace(0,2*pi,numPts);  %angle goes from 0 to 2*pi.
 +
 +
x0=6.5;  %Define center (x0,y0) of circle and radius (r)
 +
y0=0;
 +
r=1.06066;
 +
 +
% loop through all the values of phi
 +
for i=1:length(phi),
 +
  x2=x0+r*cos(phi(i)); %x2 and y2 trace out a circle.
 +
  y2=y0+r*sin(phi(i));
 +
 +
  %First do inverse kinematics to find angles...
 +
  la=4.5;
 +
  lb=3.75;
 +
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2, y2);
 +
 +
  %Then do forward kinematics to find arm locations.
 +
  %[xa ya xb yb] = forwardKinematics(la, lb, theta_a, theta_b);
 +
     
 +
  pause(0.1);      %delay 1/10 second
 +
 +
 +
  gotoAngles(s,theta_a,theta_b-theta_a,750);
 +
 +
end
 +
 
 +
 +
%Draw and animate the arm;
 +
numPts = 10;                  %the number of points in the animation
 +
x2=linspace(6.5+r,6.5+r,numPts)      %generate an array of x2 ...
 +
y2=linspace(r,-r,numPts)  %... and y2 values to define a line.
 +
 +
% loop through all the values of x2 and y2
 +
for i=0:numPts,
 +
  x2=6.5+r
 +
  y2=r-(i*(2*r/numPts))
 +
 
 +
  %First do inverse kinematics to find angles...
 +
  la=4.5;
 +
  lb=3.75;
 +
 +
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2, y2);
 +
 
 +
  pause(0.1);      %delay 1/10 second
 +
 
 +
    gotoAngles(s,theta_a,theta_b-theta_a,750);
 +
end
 +
 +
%Draw the second side;
 +
numPts = 10;                  %the number of points in the animation
 +
x2=linspace(6.5+r,6.5-r,numPts)      %generate an array of x2 ...
 +
y2=linspace(-r,-r,numPts)  %... and y2 values to define a line.
 +
 +
% loop through all the values of x2 and y2
 +
for i=1:length(x2),
 +
 
 +
  %First do inverse kinematics to find angles...
 +
  la=4.5;
 +
  lb=3.75;
 +
 +
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
 +
 
 +
  pause(0.1);      %delay 1/10 second
 +
 
 +
    gotoAngles(s,theta_a,theta_b-theta_a,750);
 +
end
 +
 +
%Draw the third side;
 +
numPts = 10;                  %the number of points in the animation
 +
x2=linspace(6.5-r,6.5-r,numPts)      %generate an array of x2 ...
 +
y2=linspace(-r,r,numPts)  %... and y2 values to define a line.
 +
 +
% loop through all the values of x2 and y2
 +
for i=1:length(x2),
 +
 
 +
  %First do inverse kinematics to find angles...
 +
  la=4.5;
 +
  lb=3.75;
 +
 +
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
 +
 
 +
  pause(0.1);      %delay 1/10 second
 +
 
 +
    gotoAngles(s,theta_a,theta_b-theta_a,750);
 +
end
 +
 +
%Draw the fourth side;
 +
numPts = 10;                  %the number of points in the animation
 +
x2=linspace(6.5-r,6.5+r,numPts)      %generate an array of x2 ...
 +
y2=linspace(r,r,numPts)  %... and y2 values to define a line.
 +
 +
% loop through all the values of x2 and y2
 +
for i=1:length(x2),
 +
 
 +
  %First do inverse kinematics to find angles...
 +
  la=4.5;
 +
  lb=3.75;
 +
 +
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
 +
 
 +
  pause(0.1);      %delay 1/10 second
 +
 
 +
    gotoAngles(s,theta_a,theta_b-theta_a,750);
 +
end

Revision as of 14:50, 13 November 2008

Members

Jared Nolan: jnolan1, David D'Annunzio, Daniel Cabrera, Tony Blekicki

MatLab Code for Physical Model

%[thetaA, thetaB] = inverseKinematicsfunction(4.5, 3.75,6.5,-1.5);

% This script takes input from the user and uses it to test the function % gotoAngles

s=instrfind;  %Find any serial links (we can have only 1) delete(s);  %... and delete. %Create a new serial communications link s=serial('COM1','Baudrate',115200,'Terminator','CR'); fopen(s);  %... and open it

% set pulsewidth on channels 1 & 2to 1500 microseconds (over 200 mS) fprintf(s,'#1P1500#2P1500T200');

%Draw and animate the arm; numPts = 20;  %the number of points in the animation phi = linspace(0,2*pi,numPts);  %angle goes from 0 to 2*pi.

x0=6.5;  %Define center (x0,y0) of circle and radius (r) y0=0; r=1.06066;

% loop through all the values of phi for i=1:length(phi),

  x2=x0+r*cos(phi(i)); %x2 and y2 trace out a circle.
  y2=y0+r*sin(phi(i));
  %First do inverse kinematics to find angles...
  la=4.5;
  lb=3.75;
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2, y2);
  %Then do forward kinematics to find arm locations.
  %[xa ya xb yb] = forwardKinematics(la, lb, theta_a, theta_b);
     
  pause(0.1);       %delay 1/10 second


  gotoAngles(s,theta_a,theta_b-theta_a,750);

end


%Draw and animate the arm; numPts = 10;  %the number of points in the animation x2=linspace(6.5+r,6.5+r,numPts)  %generate an array of x2 ... y2=linspace(r,-r,numPts)  %... and y2 values to define a line.

% loop through all the values of x2 and y2 for i=0:numPts,

  x2=6.5+r
  y2=r-(i*(2*r/numPts))
  
  %First do inverse kinematics to find angles...
  la=4.5;
  lb=3.75;
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2, y2);
  
  pause(0.1);       %delay 1/10 second
  
   gotoAngles(s,theta_a,theta_b-theta_a,750);

end

%Draw the second side; numPts = 10;  %the number of points in the animation x2=linspace(6.5+r,6.5-r,numPts)  %generate an array of x2 ... y2=linspace(-r,-r,numPts)  %... and y2 values to define a line.

% loop through all the values of x2 and y2 for i=1:length(x2),

  %First do inverse kinematics to find angles...
  la=4.5;
  lb=3.75;
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
  
  pause(0.1);       %delay 1/10 second
  
   gotoAngles(s,theta_a,theta_b-theta_a,750);

end

%Draw the third side; numPts = 10;  %the number of points in the animation x2=linspace(6.5-r,6.5-r,numPts)  %generate an array of x2 ... y2=linspace(-r,r,numPts)  %... and y2 values to define a line.

% loop through all the values of x2 and y2 for i=1:length(x2),

  %First do inverse kinematics to find angles...
  la=4.5;
  lb=3.75;
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
  
  pause(0.1);       %delay 1/10 second
  
   gotoAngles(s,theta_a,theta_b-theta_a,750);

end

%Draw the fourth side; numPts = 10;  %the number of points in the animation x2=linspace(6.5-r,6.5+r,numPts)  %generate an array of x2 ... y2=linspace(r,r,numPts)  %... and y2 values to define a line.

% loop through all the values of x2 and y2 for i=1:length(x2),

  %First do inverse kinematics to find angles...
  la=4.5;
  lb=3.75;
  [theta_a, theta_b]= inverseKinematicsfunction(la, lb, x2(i), y2(i));
  
  pause(0.1);       %delay 1/10 second
  
   gotoAngles(s,theta_a,theta_b-theta_a,750);

end