Tomato Slicer
Contents
Group Members
Background
Motivation
In our group, Tony really likes tomatoes, but he’s too lazy to cut them. He’d rather give a knife, a lethal weapon, to a robot to do it for him. So we all decided to engage in this wonderful endeavor. One of our goals is to rid the world of knives by giving the responsibility of cutting to robots which can easily be tampered with to carry out an evildoer's bidding.
Setting Up the Project
The tomato slicer will use two servo motors. One will control the knife arm and the other will sit under a base and rotate the tomato. A downward motion by the knife arm will slice the tomato and each time the tomato is sliced it is rotated by the second servo and then the process is repeated again.
The software will be done on MATLAB.
Timeline
-Build the system by December 2nd -Write the code by December 3rd -Start on wiki by November 20th -Work out the kinks by December 7th to present -Finish the wiki by December 8th
Equipment Required
-Many tomatoes -2 servo motors -1 knife -Base made by Smitty -Duct tape -String