Difference between revisions of "User:Esilver1"

From ENGR005 2008
Jump to: navigation, search
 
(13 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
[http://www.swarthmore.edu/NatSci/echeeve1/Class/e5/E5Index.html E5 Home Page]
 
[http://www.swarthmore.edu/NatSci/echeeve1/Class/e5/E5Index.html E5 Home Page]
  
[http://wikis.swarthmore.edu/ENGR005_2008/index.php/Team_Willets Ball Drop for Willets]
+
[http://wikis.swarthmore.edu/ENGR005_2008/index.php/Team_Willets Ball Drop for Willets (updated with report!)]
 +
 
 +
[http://wikis.swarthmore.edu/ENGR005_2008/index.php/Project_2%2C_Team_B3 Project 2(bridge!), Team B3 link]
 +
 
 +
[http://wikis.swarthmore.edu/ENGR005_2008/index.php/Mechanisms Mechanisms Home Page (Team B2)]
 +
 
 +
[[Robotic Arm: Team Blue]]
 +
 
 +
[http://wikis.swarthmore.edu/ENGR005_2008/index.php/Robotic_Arm_Deux Robot Arm Deux]
  
 
[[Image:Swat engineering.gif]]
 
[[Image:Swat engineering.gif]]
  
 +
[[Image:best design so far(but not team best).jpg]]
 +
5.53 * 4.64200e-7 = 2.567026 × 10-6
  
== Brainstorming session ==
+
[[Image:Elan'spart.jpg]]
Although this was the first brainstorming session that we completed as a team, it proved to be a constructive and worthwhile session where we successfully built on each other’s ideas to create our final design. 
+
We started out session by identifying all of the materials that were given. These included one paper bag, one garbage bag, one plastic washer, one plastic nut, one roll of electrical tape, three rubber bands, three wooden dowels of equal length, and one paper clip. Although we did not include all of the given materials in our final design, we discussed the possible attributes that each material would give to the final design. The plastic bag, wooden dowels, and the electrical tape were decided to be of the most importance.
+
The initial design ideas included a gliding parachute (either circular or triangular), a kite, a cape, and an upside-down parachute. We decided that we needed to maximize the area of the plastic bag to maximize the amount of air that could be displaced while in free fall. Some questions arose that were quickly answered: do we have to drop it? Yes. Can we throw it in the air? No, it must fall from rest.
+

Latest revision as of 22:32, 8 December 2008

Welcome to Elan Silverblatt-Buser's Wiki page.

Links

Please feel free to click on any of these links!

Email to Elan Silverblatt-Buser

E5 Home Page

Ball Drop for Willets (updated with report!)

Project 2(bridge!), Team B3 link

Mechanisms Home Page (Team B2)

Robotic Arm: Team Blue

Robot Arm Deux

Swat engineering.gif

Best design so far(but not team best).jpg 5.53 * 4.64200e-7 = 2.567026 × 10-6

Elan'spart.jpg