Difference between revisions of "Simple Cylinder Engine"

From ENGR005_2012
Jump to: navigation, search
(Created page with 'My project is to use solidworks to make a simple model of a cylinder engine. Once designed on solidworks, I will use the 3D printer to make a physical copy of the model which sho…')
 
Line 1: Line 1:
My project is to use solidworks to make a simple model of a cylinder engine. Once designed on solidworks, I will use the 3D printer to make a physical copy of the model which should have pistons moving as a crank rotates. I will not need any supplys other than a computer with SolidWorks and access to a 3D printer.
+
My project is to use solidworks to make a simple model of a cylinder engine.  
 +
Once designed on solidworks, I will use the 3D printer to make a physical copy  
 +
of the model which should have pistons moving as a crank rotates. The engine
 +
will function by the action of pistons moving up and down while attached to a
 +
crank which will in turn rotate. As this is not an actual engine, the movement
 +
of the crank will move the pistons instead of the pistons moving the crank.
 +
I will not need any supplys other than a computer with SolidWorks and access to a 3D printer.

Revision as of 12:59, 15 November 2012

My project is to use solidworks to make a simple model of a cylinder engine. Once designed on solidworks, I will use the 3D printer to make a physical copy of the model which should have pistons moving as a crank rotates. The engine will function by the action of pistons moving up and down while attached to a crank which will in turn rotate. As this is not an actual engine, the movement of the crank will move the pistons instead of the pistons moving the crank.

I will not need any supplys other than a computer with SolidWorks and access to a 3D printer.