Difference between revisions of "Team Hugo Cabret - Clock Project"

From ENGR005_2012
Jump to: navigation, search
Line 1: Line 1:
 
==Project Description==
 
==Project Description==
Our group has decided to design and build a function clock from scratch using Solidworks.  The clock, operating on a specially ordered clock motor, will use a set of fifteen gears to display the seconds, minutes, and hours.  We will design these gears on Solidworks, print them with the 3D printer, and attach them to the shaft of the motor.
+
Our group has decided to design and build a functioning clock from scratch using Solidworks.  The clock, operating on a specially ordered clock motor, will use a set of fifteen gears to display seconds, minutes, hours, and potentially days of the week.  We will design the gears, face, and hands of the clock on Solidworks, and we will print them using the 3D printer. Because our motor has only one shaft, we will need
  
 
==Parts==
 
==Parts==
We will need to order a 120 V clock motor with shaft operating at 60 Hz.  This will cost approximately $15 from
+
We will need to order a 120 V clock motor with shaft operating at 60 Hz.  This will cost approximately $15 from _________.  Additionally, we will  need to design each of our 15 gears by hand on Solidworks.
  
 
==References==
 
==References==

Revision as of 16:25, 17 November 2012

Project Description

Our group has decided to design and build a functioning clock from scratch using Solidworks. The clock, operating on a specially ordered clock motor, will use a set of fifteen gears to display seconds, minutes, hours, and potentially days of the week. We will design the gears, face, and hands of the clock on Solidworks, and we will print them using the 3D printer. Because our motor has only one shaft, we will need

Parts

We will need to order a 120 V clock motor with shaft operating at 60 Hz. This will cost approximately $15 from _________. Additionally, we will need to design each of our 15 gears by hand on Solidworks.

References

4) Add a link to a project proposal. This proposal should include:

       * 1-2 paragraphs describing the project,
       *  any necessary parts you will need, including cost and source for parts,
       * any references (if necessary).