Team Hugo Cabret - Clock Project

From ENGR005_2012
Revision as of 16:17, 17 November 2012 by Cemery1 (Talk | contribs)

Jump to: navigation, search

Project Description

Our group has decided to design and build a function clock from scratch using Solidworks. The clock, operating on a specially ordered clock motor, will use a set of fifteen gears to display the seconds, minutes, and hours. We will design these gears on Solidworks, print them with the 3D printer, and attach them to the shaft of the motor.


We will need to order a 120 V clock motor with shaft operating at 60 Hz. This will cost approximately $15 from


4) Add a link to a project proposal. This proposal should include:

       * 1-2 paragraphs describing the project,
       *  any necessary parts you will need, including cost and source for parts,
       * any references (if necessary).