Difference between revisions of "Team J"
From ENGR005_2012
(→Best Designs From Alpha and Omega) |
|||
(19 intermediate revisions by 2 users not shown) | |||
Line 5: | Line 5: | ||
*[[User:lrigell1 | Laura Rigell]] | *[[User:lrigell1 | Laura Rigell]] | ||
*[[User:tgelles1 | Teo Gelles]] | *[[User:tgelles1 | Teo Gelles]] | ||
− | |||
− | |||
− | |||
− | |||
=Team Brainstorm= | =Team Brainstorm= | ||
Line 17: | Line 13: | ||
*minimum volume - .2in^3 and maximum voluvme- .92in^3-- keeping this in mind we want the least volume and least displacement | *minimum volume - .2in^3 and maximum voluvme- .92in^3-- keeping this in mind we want the least volume and least displacement | ||
+ | =Best Designs From Alpha and Omega= | ||
+ | [[File:Team Alpha.JPG|200px|thumb|left|Team Alpha design 0.92in^3X.5631=.518]] | ||
+ | [[File:Lucas-2.JPG|200px|thumb|left|Team Omega design 0.93in^3X.2276mm=.212]] | ||
+ | |||
+ | Both groups did some testing and found that tirangles are not the best shape to cut out and curved edges worked well. We used ideas from both groups and expanded on them for the final product. | ||
=Final Design= | =Final Design= | ||
− | + | We knew the goal was to have the least volume and least displacement so our '''final design''' is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out. | |
+ | |||
our voulme is: .84 in^3 | our voulme is: .84 in^3 | ||
+ | |||
our displacement is: .2368 mm | our displacement is: .2368 mm | ||
+ | |||
our score is: .199 | our score is: .199 | ||
− | + | ||
+ | [[File:Final Design.jpg|200px|thumb|right|Final Design (shown with von Mises Stresses)]] |
Latest revision as of 22:06, 23 September 2012
Team Members
Team Brainstorm
- explore curves-(curved corners,curves around pre-cut notches)
- the middle is the least imporatant (when figuring out where to cut pieces out for least displacement and least volume)
- circles are the best shape (not sqaures or triangles- as shown by our previous test runs)
- make is easier for the robot arm to bend
- minimum volume - .2in^3 and maximum voluvme- .92in^3-- keeping this in mind we want the least volume and least displacement
Best Designs From Alpha and Omega
Both groups did some testing and found that tirangles are not the best shape to cut out and curved edges worked well. We used ideas from both groups and expanded on them for the final product.
Final Design
We knew the goal was to have the least volume and least displacement so our final design is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out.
our voulme is: .84 in^3
our displacement is: .2368 mm
our score is: .199