Difference between revisions of "Team J"
From ENGR005_2012
| Line 21: | Line 21: | ||
=Final Design= | =Final Design= | ||
Our '''final design''' is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out. | Our '''final design''' is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out. | ||
| + | |||
our voulme is: .84 in^3 | our voulme is: .84 in^3 | ||
| + | |||
our displacement is: .2368 mm | our displacement is: .2368 mm | ||
| + | |||
our score is: .199 | our score is: .199 | ||
| + | |||
We knew the goal was to have the least volume and least displacement so... | We knew the goal was to have the least volume and least displacement so... | ||
Revision as of 20:53, 23 September 2012
Team Members
Best Designs From Alpha and Omega
File:File.png
Team Omega
Team Brainstorm
- explore curves-(curved corners,curves around pre-cut notches)
- the middle is the least imporatant (when figuring out where to cut pieces out for least displacement and least volume)
- circles are the best shape (not sqaures or triangles- as shown by our previous test runs)
- make is easier for the robot arm to bend
- minimum volume - .2in^3 and maximum voluvme- .92in^3-- keeping this in mind we want the least volume and least displacement
Final Design
Our final design is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out.
our voulme is: .84 in^3
our displacement is: .2368 mm
our score is: .199
We knew the goal was to have the least volume and least displacement so...
