Team J

From ENGR005_2012
Revision as of 20:18, 23 September 2012 by Egluck1 (Talk | contribs)

Jump to: navigation, search

Team Members

Best Designs From Alpha and Omega

  • anyone with saved designs is welcome to upload as the deadline approaches.


Team Brainstorm

  • explore curves-(curved corners,curves around pre-cut notches)
  • the middle is the least imporatant (when figuring out where to cut pieces out for least displacement and least volume)
  • circles are the best shape (not sqaures or triangles- as shown by our previous test runs)
  • make is easier for the robot arm to bend
  • minimum volume - .2in^3 and maximum voluvme- .92in^3-- keeping this in mind we want the least volume and least displacement


Final Design

Our final design is centered on one main theme: Circles, Circles, Circles! This include curves on the edges, big cut out circles in the middle as well as one small circle cut out. our voulme is: .84 in^3 our displacement is: .2368 mm our score is: .199 We knew the goal was to have the least volume and least displacement so...