Difference between revisions of "Team P"

From ENGR005_2012
Jump to: navigation, search
Line 9: Line 9:
 
       = 0.88 in^3 x 0.228 mm
 
       = 0.88 in^3 x 0.228 mm
 
       = 0.20 mm-in^3
 
       = 0.20 mm-in^3
 +
  
 
==Team PΩ Best==
 
==Team PΩ Best==
Line 17: Line 18:
 
       = 0.77 in^3 x 0.275 mm
 
       = 0.77 in^3 x 0.275 mm
 
       = 0.21 mm-in^3
 
       = 0.21 mm-in^3
 +
  
 
== Team Members ==
 
== Team Members ==

Revision as of 11:37, 22 September 2012

Introduction

In designing this Robot Arm, we first began working individually. We then tested our individual designs to determine who had the best design. After finding the robot arm with the best score, we began modifying that design to increase the score as the Pα and the PΩ groups. Pα and PΩ then combined as Team P. As Team P we looked at the two designs we had and combined features from both to create our final design.

Team Pα Best

After comparing Pα designs, we determined that the design below was the one with the best score.

Error creating thumbnail: Unable to save thumbnail to destination
Team Pα Best

Score = Volume x Maximum Deflection

     = 0.88 in^3 x 0.228 mm
     = 0.20 mm-in^3


Team PΩ Best

After comparing PΩ designs, we determined that the design below was the one with the best score.

Error creating thumbnail: Unable to save thumbnail to destination
Team PΩ Best

Score = Volume x Maximum Deflection

     = 0.77 in^3 x 0.275 mm
     = 0.21 mm-in^3


Team Members

Yousef Alhessi

Kate Barron

Casey Drubin

Matt Hirsh

Shaina Lu