Task list

Introduction

When you complete a task, do not delete it! Mark it with strike-through (see example below) and add your name and date after it.

• Make a to-do list on the wiki. Completed 2010-05-27, Eric.

Telescope software tasks

• Install Dimension 4 software to improve clock accuracy on observatory PC. See Eastman et al. 2010 for more details on precise timekeeping.
• Install JSkyCalc on control room computer. (More info on using it at AstroBetter.)
  • Edit local file to add our observatory coordinates as described here.
• Install latest version of FocusMax software (3.4.40) - it's on the Y: drive mapped to the PC.
• Preparations for mapping run to improve the telescope pointing model.
  • Download and install the full version of PinPoint. Eric - this should be registered in my name.
  • Download and install AAG TPointMapper
  • Download and install USNO A2.0 catalog for use by PinPoint as described here.

Improving telescope operations

• Do a substantial (> 100 point) point run using AAG TPointMapper.
• Use FocusMax software to automate focusing of the imaging camera.
  • Read background info on its operation.
  • Set up FocusMax to link to TCC focuser.
  • Do calibration runs to set up V curves for our system.
  • Change MaximDL settings to link to FocusMax hub, which then links to the focuser/TCC. Save this configuration (under Apogee/Photometry).
• Continue to work on [Autoguiding] improvements - especially the optimal Dec backlash setting.

Documenting telescope operations

• Create a page on Autoguiding to document what we learn about best settings for autoguiding.
• Download availables manuals for the eShel spectrograph and put on our Documentation page.
• Put MaximDL documentation (or links to it) on Documentation page.

Possible future hardware improvements

• Possible automation of dome opening/closing?
• Install eShel spectrograph.