Difference between revisions of "Task list"

From Telescope
Jump to: navigation, search
Line 4: Line 4:
  
  
== Telescope software tasks ==
+
== Observing ==
 +
* Create an [[Observing schedule]] page, with a calendar for who is responsible for observing if a given night is clear.
 +
* Sign up for observing times - we'll plan on two people per night.  (Keep in mind that you probably will not end up observing on about 50% of the nights you sign up for, due to the vagaries of our weather.  But you need to be <i>ready</i> to observe on those nights.)
 +
 
 +
 
 +
== Telescope software tasks (good for cloudy weather!) ==
 
* Install [http://www.thinkman.com/dimension4/download.htm Dimension 4 software] to improve clock accuracy on observatory PC. See [http://adsabs.harvard.edu/abs/2010arXiv1005.4415E Eastman et al. 2010] for more details on precise timekeeping.  
 
* Install [http://www.thinkman.com/dimension4/download.htm Dimension 4 software] to improve clock accuracy on observatory PC. See [http://adsabs.harvard.edu/abs/2010arXiv1005.4415E Eastman et al. 2010] for more details on precise timekeeping.  
* Install [http://www.dartmouth.edu/~physics/faculty/skycalc/flyer.html JSkyCalc] on control room computer.  ([http://www.astrobetter.com/jskycalc/ More info] on using it at [http://www.astrobetter.com AstroBetter].)
+
* Install [http://www.dartmouth.edu/~physics/faculty/skycalc/flyer.html JSkyCalc] on control room computer.  ([http://www.astrobetter.com/jskycalc/ More info] on using it at [http://www.astrobetter.com AstroBetter].) <i>--Andrew</i>
 
** Edit local file to add our observatory coordinates as described [http://www.dartmouth.edu/~physics/faculty/skycalc/flyer.html here].
 
** Edit local file to add our observatory coordinates as described [http://www.dartmouth.edu/~physics/faculty/skycalc/flyer.html here].
 
** After that file is created, let Eric know and we'll also install on the Linux machines.
 
** After that file is created, let Eric know and we'll also install on the Linux machines.
 
* Install latest version of FocusMax software (3.4.40) - it's on the Y: drive mapped to the PC.  
 
* Install latest version of FocusMax software (3.4.40) - it's on the Y: drive mapped to the PC.  
* Preparations for mapping run to improve the telescope pointing model.   
+
* Preparations for mapping run to improve the telescope pointing model.   
** Download and install the full version of [http://pinpoint.dc3.com/ PinPoint].  <i>Eric - this should be registered in my name.</i>
+
** Download and install the full version of [http://pinpoint.dc3.com/ PinPoint].  <i>Eric will do - this should be registered to the department.</i>
 
** Download and install [http://www.aagware.eu/software.htm AAG TPointMapper]
 
** Download and install [http://www.aagware.eu/software.htm AAG TPointMapper]
 
** Download and install USNO A2.0 catalog for use by PinPoint as described [http://support.dc3.com/wsx/$webstar.exe/prob?129 here].
 
** Download and install USNO A2.0 catalog for use by PinPoint as described [http://support.dc3.com/wsx/$webstar.exe/prob?129 here].
Line 24: Line 29:
 
** Change MaximDL settings to link to FocusMax hub, which then links to the focuser/TCC.  Save this configuration (under Apogee/Photometry).  
 
** Change MaximDL settings to link to FocusMax hub, which then links to the focuser/TCC.  Save this configuration (under Apogee/Photometry).  
 
* Continue to work on [[Autoguiding]] improvements - especially the optimal Dec backlash setting.
 
* Continue to work on [[Autoguiding]] improvements - especially the optimal Dec backlash setting.
* Investigate and document whether or not slow warm-up of the CCD is necessary. <i>Jean</i>
+
* Investigate and document whether or not slow warm-up of the CCD is necessary. <i>--Jean</i>
 
* Create and save some Auto sequences in MaximDL to facilitate running a series of bias and dark frames before or after a run.  
 
* Create and save some Auto sequences in MaximDL to facilitate running a series of bias and dark frames before or after a run.  
 
* Reinforce flat-field screen and hang in dome.
 
* Reinforce flat-field screen and hang in dome.
Line 40: Line 45:
 
* Write scripts to streamline data reduction (bias, flat, etc.)
 
* Write scripts to streamline data reduction (bias, flat, etc.)
 
* Write or find scripts to streamline photometry and creating light curves.
 
* Write or find scripts to streamline photometry and creating light curves.
* Investigate optimal use of multiple comparison stars, e.g. approaches of [http://adsabs.harvard.edu/abs/2009MNRAS.396.1023S Southworth et al. 2009] or [http://adsabs.harvard.edu/abs/2005AN....326..134B Broeg et al. 2005].  
+
* Investigate optimal use of multiple comparison stars, e.g. approaches of [http://adsabs.harvard.edu/abs/2009MNRAS.396.1023S Southworth et al. 2009] or [http://adsabs.harvard.edu/abs/2005AN....326..134B Broeg et al. 2005]. <i>--Jackson</i>
  
  

Revision as of 23:56, 27 May 2010

Introduction

When you complete a task, do not delete it! Mark it with strike-through (see example below) and add your name and date after it.

  • Make a to-do list on the wiki. Completed 2010-05-27, Eric.


Observing

  • Create an Observing schedule page, with a calendar for who is responsible for observing if a given night is clear.
  • Sign up for observing times - we'll plan on two people per night. (Keep in mind that you probably will not end up observing on about 50% of the nights you sign up for, due to the vagaries of our weather. But you need to be ready to observe on those nights.)


Telescope software tasks (good for cloudy weather!)

  • Install Dimension 4 software to improve clock accuracy on observatory PC. See Eastman et al. 2010 for more details on precise timekeeping.
  • Install JSkyCalc on control room computer. (More info on using it at AstroBetter.) --Andrew
    • Edit local file to add our observatory coordinates as described here.
    • After that file is created, let Eric know and we'll also install on the Linux machines.
  • Install latest version of FocusMax software (3.4.40) - it's on the Y: drive mapped to the PC.
  • Preparations for mapping run to improve the telescope pointing model.
    • Download and install the full version of PinPoint. Eric will do - this should be registered to the department.
    • Download and install AAG TPointMapper
    • Download and install USNO A2.0 catalog for use by PinPoint as described here.


Improving telescope operations

  • Do a substantial (> 100 point) point run using AAG TPointMapper.
  • Use FocusMax software to automate focusing of the imaging camera.
    • Read background info on its operation.
    • Set up FocusMax to link to TCC focuser.
    • Do calibration runs to set up V curves for our system.
    • Change MaximDL settings to link to FocusMax hub, which then links to the focuser/TCC. Save this configuration (under Apogee/Photometry).
  • Continue to work on Autoguiding improvements - especially the optimal Dec backlash setting.
  • Investigate and document whether or not slow warm-up of the CCD is necessary. --Jean
  • Create and save some Auto sequences in MaximDL to facilitate running a series of bias and dark frames before or after a run.
  • Reinforce flat-field screen and hang in dome.
  • Document procedure for dome flats.
  • Install and test out plug-in for automating sky flats.


Documenting telescope operations


Photometric light curve improvements

  • Write scripts to streamline data reduction (bias, flat, etc.)
  • Write or find scripts to streamline photometry and creating light curves.
  • Investigate optimal use of multiple comparison stars, e.g. approaches of Southworth et al. 2009 or Broeg et al. 2005. --Jackson


Possible future improvements

  • Possible automation of dome opening/closing?
  • Install weather station / cloud sensor?
  • Observatory automation with ACP, CCD AutoPilot, or CCD Commander?
  • Install eShel spectrograph.